1.锥尖,锥顶
1.用锥尖敲打[弯,拔,打平]
1.the end of a hammerhead opposite the flat face, often rounded or wedge-shaped, and used for bending and shaping
1.to bend or shape something by striking it with the peen of a hammer
1.The surface residual stresses of the rolled workpieces can be reduced remarkably by shot peening.
滚压后再喷丸显著降低工件的表面残余压应力。
2.The surface layer of shot peening strengthening was analyzed with OM, SEM and TEM.
采用金相显微镜、扫描电镜和透射电镜分析材料喷丸强化层。
3.Great stress relief would occur in the uniform surface residual stress introduced by shot-peening with a great stress gradient.
喷丸引入的表层残余应力均匀且梯度大，主要发生应力松弛；
4.The surface nanocrystallization is approached on a commercial pure titanium by using high energy shot peening(HESP) technique.
用高能振动喷丸法对工业纯钛进行了表面纳米化的研究。
5.Glass heads used in peening processes, metal cleaning and polishing and used as filler materials in plastic, paint and rubber manufacturing.
二、高强度玻璃微珠适用于机械喷丸，金属物的清理抛光及塑料、橡胶、油漆和复合材料等化工产品的添加剂、增强剂的高强度玻璃微珠。
6.Fatigue test was carried out for commercial pure titanium that have nano-crystallized in surface by high-energy shot peening.
采用高能喷丸方法使工业纯钛疲劳试样的表层实现纳米化，并进行了疲劳试验。
7.Effect of pressure and time of shot peening on recrystallization of nickel base single crystal superalloy was studied.
研究了喷丸压力和喷丸时间对一种镍基单晶高温合金再结晶的影响。
8.rolling+peening treatment has obviously decreased surface compressive residual stress on rolling pieces, which weakened rolling effect.
滚压加喷丸处理显著降低了滚压工件表面残余压应力，减弱了滚压工艺的效果。
9.Peening magnitude of vibration roller can be adjusted as required or even to the extent of being pressed without peening.
震荡滚的敲击幅度，亦可随需要加以调整，甚至可调整到只有压着而没有敲击的程度。
10.Scoring or shot peening procedure shall be in accordance with the manufacturer's technology.
划痕或喷丸硬化过程要按生产厂家技术进行？