1.模塑,作模;造型;翻砂,铸造;铸造物,模塑物;【建】花边,线脚,风景线
2.覆土;覆盖的土壤
1.“molding”的变体
1.The variant of molding
1.Extra mouldings are made up to supplement the standard left-hand-drive dashboard moulding to take a huge array of equipment.
额外的装饰是由以补充标准左仪表板成型采取一个巨大的一系列设备。
2.It may also be used in a similar manner for multi-impression tubular shaped mouldings on underfeed and runner less moulds.
也可以类似的方式用于多模板或无流道模具的多型腔管形塑件。
3.starting with a small gate width, the mould is tried out with a short injection stroke so that short mouldings are obtained.
开始用一个较小的浇口宽度，在注塑机上一次短射试模，由此得到一些短缺的塑件。
4.This type of gate is used for tubular-type mouldings when more than one impression is required in a simple two-plate mould.
用于简单的两模板模具中型腔数多于一个的管形塑件。
5.Rather than using physical mouldings to design a car, as remains a common practice today, for instance, this is all done online at AACE.
举例来说，与今天依然存在的普通方法——使用物理模塑来设计汽车所不同的是，Satyam的汽车都是在AACE内部通过网络完成。
6.Plastics. Melamine-formaldehyde mouldings. Determination of extractable formaldehyde.
塑料.密胺甲醛树脂模制件.可提取甲醛含量的测定
7.Thus, during the latter part of the opening stroke the ejector assembly is pulled. thereby ejecting the mouldings.
因此，在开模行程的后阶段，顶料板组合被拉出，塑件因而被顶出。
8.To achieve optimum coating quality, the maximum moisture content of the mouldings must be less than 0. 1%.
为了达到最好的涂层质量，塑件的最高含水量不能超过0.
9.Fabricate frames, concealed stiffeners, reinforcement, edge channels, louvers and mouldings from either cold-rolled or hot-rolled steel.
制造门框，内加强筋，加强板，边槽，百叶窗和模件，可选用冷轧或者热轧钢板。
10.The sill extensions are visually integrated front and rear with the scalloped corners of the new bumper mouldings .
穿凿扩展综合视前方与后方的波浪角落的新保险杠接洽。