1.A microcontroller is often small and low cost. The components are chosen to minimize size and to be as inexpensive as possible.
一个微控制器通常很小，并且成本很低。组件的大小是越小越好，价格越低越好。
2.MCS-51 microcontroller which is all typical and representative of a widely used in various fields.
其中51单片机是各种单片机中最为典型和最有代表性的一种，广泛应用于各个领域。
3.Mainly used for transistor output characteristic curve for data collection, controlled by a microcontroller, into the PC, for display.
主要用于对晶体管输出特性曲线进行数据采集，由单片机进行控制，送入PC机进行显示。
4.To increase the accuracy of the system, a calibration or conditioning algorithm must be programmed into the microcontroller.
为了增加系统，校准或调节算法精度必须被编程到微控制器。
5.Master in part by the microcontroller and keyboard of two parts, shown in part by the LCD display module and LED work analog parts.
主控部分是由单片机和键盘两部分构成，显示部分是由LCD显示模块和LED工作模拟部分构成。
6.The accomplishment of this microcontroller can settle a strong base to design other ASICs and implement system integration.
本微控制器的设计完成可以为将来开发具有特殊用途的专用集成电路以及实现系统集成奠定坚实的基础。
7.In microcontroller serial port communication, the system require that the baud rate of dispatcher and sink should keep consistent.
在单片机串行通信中，要求发送和接收的波特率保持一致。
8.The microcontroller reads the state of a pin through the Pin value line, and writes though the latch value line.
微控制器读取通过引脚值线引脚的状态，并写入锁存尽管价值线。
9.The microcontroller and computer can easily communicate through serial port, thus the system can be controlled by user with computer.
单片机和上位机之间通过串口通信，可以用计算机操纵整个系统。
10.CAN controllers with object storage are designed to take as much strain as possible off the local microcontroller.
能与对象存贮的控制器被设计采取同样多张力尽可能地方微型控制器。