1.【机】轴胎,心轴,紧轴;【冶】(铸造用的)圆形心轴;(采矿用的)鹤嘴锄,铁镐
1.a tapered shaft or arbor to which work is secured during machining or turning, e.g. on a lathe
2.a rod around which materials such as metal or glass are molded, forged, or shaped
3.a shaft on which a tool such as a dentist's drill or machining tool is mounted
4.a miner's pick
1.a tapered shaft or arbor to which work is secured during machining or turning, e.g. on a lathe
2.a rod around which materials such as metal or glass are molded, forged, or shaped
3.a shaft on which a tool such as a dentist's drill or machining tool is mounted
4.a miner's pick
1.The RTTS Safety Joint is held inoperative by a tension sleeve located on the bottom of the mandrel to help prevent premature release.
RTTS的安全接头通过位于芯轴底部的张力套保持原有状态来防止过早解封
2.In order to avoid damage to the reinforcement the diameter to which the bar is bent (Mandrel diameter) should not be less than .
为了避免损坏钢筋，钢筋最大弯曲处的直径（芯轴直径）最小应不低于。
3.Electroformed apertures reproduce the mandrel photo resist finish faithfully and do not require any further processing.
电铸复制卷筒照片孔型图，不需要进一步的加工。
4.The gear milling positioning fixture is particularly suitable to be matched with the fixture of the mandrel positioning structure.
本发明特别适合芯轴定位结构的夹具配套使用。
5.A floating mandrel, also known as a French type, floats in slots in the dummy block and aligns itself in the die when extruding.
一个浮动的心轴，也被称为法国的类型，在插槽彩车在虚拟块对齐时，模具本身挤出。
6.and moving the expander tool with the sleeve located around the mandrel away from the expanded location.
和-移动膨胀工具和位于第一心轴周围的套筒从膨胀位置离开。
7.Take a long pole, the joints should be staggered, with two lengths to the top of the mandrel and then leveling.
立杆接长时，接头应错开，至顶层后再用两种长度的顶杆找平。
8.The result of winding patter experiment shows that UHMWPEF is neither overlap nor gaps and does not slip on mandrel.
线型试验结果表明：UHMWPEF在芯模表面既不重叠又不离缝，位置稳定，不打滑。
9.A fixed mandrel, also known as a German type, means it is integrated into the dummy block and stem.
心轴固定，也被称为德式，意味着它是把假茎块和集成。
10.Bend the test piece 180 degrees over a mandrel with its longitudinal axis normal to the axis of mandrel.
将测试件在一根芯轴上弯曲180度，使其纵向轴线垂直于芯轴的轴线。