1.Conclusions It is feasible to estimate emulsifiability to the method of isothermal curve of the surface(interfacial) tension .
结论乳化剂表（界）面张力等温线比较法用于评价乳化剂的乳化能力是可行的。
2.Autogenous deformation: the bulk deformation of a closed, isothermal cementitious material system not subjected to external forces.
自生变形：没有受到外力的，封闭的、等温的水泥胶结材料系统的总体变形。
3.The equilibrium solubility of AlN in austenite at different temperatures and its isothermal precipitation have been studied.
我们已经研究过在不同温度的奥氏体氮化铝的溶解度以及等温过程的沉淀物。
4.A non-isothermal kinetic model, which took account of the effect of microwave, was proposed to fit the experimental data.
提出的微波非等温磷矿分解反应动力学模型与实验结果很好地相符。
5.Under consideration of cost, it is therefore suggested to let the isothermal tempering process last just for 30 min in practical use.
因此在成本考量之下，实际应用只需要进行30分钟的恒温回火持时就已足够。
6.During the pumping cycle the gas is in intimate contact with the sealing liquid and compression is nearly isothermal.
在抽运周期内，气体会与密封液和几乎等温的压缩气体紧密接触。
7.The results show that the joint can be strengthened through near isothermal forging and gradient heat treatment.
结果表明：近等温锻造+梯度热处理能使焊接接头得到强化。
8.AIR DISTRIBUTION AND AIR DIFFUSION. LABORATORY AERODYNAMIC TESTING AND RATING OF AIR TERMINAL DEVICES IN A ISOTHERMAL AIR DISCHARGE.
空气的分配和扩散.等温空气喷孔.空气的动力学试验及其特性表示法
9.The principle of isothermal calorimetry, typical instrument (TAM Air) and its application in field of cement hydration have been described.
摘要介绍了等温量热法测量的原理、典型的仪器以及在水泥水化研究中应用所具有的特点。
10.MEMS; hot embossing; isothermal solidification; solid-liquid interdiffusion ; metallic micro-devices.
微机电；微热压成型；等温凝固；固液扩散；金属微形元件。