2,6-Bis[1-(2,6-diisopropylphenylimino)ethyl]pyridine
- 中文别名：2,6-双[1-(2,6-二异丙苯亚氨基)乙基]吡啶
- 中文释义：2,6-双[1-(2,6-二异丙苯亚氨基)乙基]吡啶;N,N\'\'-(2,6-Pyridinediyldiethylidyne)-bis-[2,6-bis-(1-methylethyl)-benzenamin
- 英文别名：N-[2,6-di(propan-2-yl)phenyl]-1-[6-[N-[2,6-di(propan-2-yl)phenyl]-C-methylcarbonimidoyl]pyridin-2-yl]ethanimine;
N-(2,6-diisopropylphenyl)-N-((1E)-1-(6-[(1E)-N-(2,6-diisopropylphenyl)ethanimidoyl]pyridin-2-yl)ethylidene)amine;
(C5H3N)(MeC=N(C6H4-2,6-iPr2))2;
2,6-BIS[1-(2,6-DI-I-PROPYLPHENYLIMINO)ETHYL]PYRIDINE;
2,5,6-TRIMETHYL[1,3]THIAZOLO[4,5-B]PYRAZINE;
2,6-bis[1-(2,6-diisopropylphenylimino)ethyl]pyridine;
2,6-{(dipp)NC(CH3)}2C5H3N
- CAS No.：204203-14-5
- 分子式：C33H43N3
- 分子量：481.71
- 精确分子量：481.34600
- PSA：37.61000
- InChI：The Key: NVPUVWBDTWBFRF-UHFFFAOYSA-N
- 分子结构式：
物化性质
- 密度：
- 0.99g/cm3
- 沸点：
- 573.6ºC at 760 mmHg
- 闪点：
- 300.7ºC
- 折射率：
- 1.551
- 蒸汽压：
- 1.44E-12mmHg at 25°C
安全信息
- 密度：
- 0.99g/cm3
- 沸点：
- 573.6ºC at 760 mmHg
- 闪点：
- 300.7ºC
- 折射率：
- 1.551
- 蒸汽压：
- 1.44E-12mmHg at 25°C
MSDS
Section 1: Product Identification
Chemical Name:2,6-Bis[1-(2,6-di-i-propylphenylimino)ethyl]pyridine, 98%
CAS Registry Number:204203-14-5
Formula:C33H43N3
EINECS Number:none
Chemical Family:organic amine
Synonym:none
Section 2: Composition and Information on Ingredients
IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL)
Title compound204203-14-5100%no datano data
Section 3: Hazards Identification
Emergency Overview:No particular hazard associated with this material.
Primary Routes of Exposure:Ingestion, inhalation
Eye Contact:May cause slight to mild irritation of the eyes
Skin Contact:May cause slight to mild irritation of the skin.
Inhalation:May be irritating to the nose, mucous membranes and respiratory tract.
No specific information is available on the physiological effects of ingestion. May cause vomiting and diarrhea.
Ingestion:
Acute Health Affects:May be irritating to skin, eyes and respiratory tract.
Chronic Health Affects:No information available on long-term chronic effects.
NTP:No
IARC:No
OSHA:No
SECTION 4: First Aid Measures
Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
Eye Exposure:
assistance in keeping their eye lids open. Get immediate medical attention.
Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
Skin Exposure:
irritation persists.
Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
Inhalation:
in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
Ingestion:
vomiting only if directed by medical personnel.
SECTION 5: Fire Fighting Measures
Flash Point:none
Autoignition Temperature:none
Explosion Limits:none
Extinguishing Medium:carbon dioxide, dry powder or foam
Fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus
Special Fire Fighting Procedures:
and full protective clothing.
Hazardous Combustion andIf involved in a fire this material may emit toxic organic fumes.
Decomposion Products:
Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.
SECTION 6: Accidental Release Measures
Spill and Leak Procedures:Small spills can be mixed with vermiculite or sodium carbonate and swept up.
SECTION 7: Handling and Storage
Handling and Storage:Store in a tightly sealed container. Keep away from heat and direct sunlight.
SECTION 8: Exposure Controls and Personal Protection
Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory.
Skin Protection:Wear protective clothing and gloves.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator
Respirator:
Protection Program to be in compliance with 29 CFR 1910.134.
Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood.
Additional Protection:No additional protection required.
SECTION 9: Physical and Chemical Properties
Color and Form:pale yellow powder
Molecular Weight:481.69
Melting Point:no data
Boiling Point:no data
Vapor Pressure:no data
Specific Gravity:no data
Odor:none
Solubility in Water:slightly soluble
SECTION 10: Stability and Reactivity
Stability:air and moisture-stable solid
Hazardous Polymerization:none
Conditions to Avoid:none
Incompatibility:strong oxidizing agents
Decomposition Products:carbon dioxide, carbon monoxide, nitrogen oxides, and organic fumes.
SECTION 11: Toxicological Information
RTECS Data:No specific information available on this product.
Carcinogenic Effects:No data available
Mutagenic Effects:No data available
Tetratogenic Effects:No data available
SECTION 12: Ecological Information
Ecological Information:No information available
SECTION 13: Disposal Considerations
Disposal:Dispose of according to local, state and federal regulations.
SECTION 14: Transportation
Shipping Name (CFR):Non-hazardous
Hazard Class (CFR):NA
Additional Hazard Class (CFR):NA
Packaging Group (CFR):NA
UN ID Number (CFR):NA
Shipping Name (IATA):Non-hazardous
Hazard Class (IATA):NA
Additional Hazard Class (IATA):NA
Packaging Group (IATA):NA
UN ID Number (IATA):NA
SECTION 15: Regulatory Information
TSCA:not listed on the TSCA inventory
SARA (Title 313):not regulated by Title 313
Second Ingredient:none
SECTION 16 - ADDITIONAL INFORMATION
N/A
分子结构与计算化学数据
计算化学数据
1.疏水参数计算参考值（XlogP）:无
2.氢键供体数量:2
3.氢键受体数量:2
4.可旋转化学键数量:2
5.互变异构体数量:3
6.拓扑分子极性表面积50.4
7.重原子数量:14
8.表面电荷:0
9.复杂度:201
10.同位素原子数量:0
11.确定原子立构中心数量:0
12.不确定原子立构中心数量:0
13.确定化学键立构中心数量:0
14.不确定化学键立构中心数量:0
15.共价键单元数量:1
