英语词典化工词典

2-Propenoic acid,2-methyl-, 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl ester

2-Propenoic acid,2-methyl-, 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl ester


  • 中文别名:2-(全氟己基)乙基甲基丙烯酸酯; 1,1,2,2-四氢全氟辛基甲基丙烯酸酯
  • 中文释义:2-(全氟己基)乙基甲基丙烯酸酯;甲基丙烯酸3,3,4,4,5,5,6,6,7,7,8,8,8-十三氟正辛酯;全氟己基乙基甲基丙烯酸酯;1H,1H,2H,2H-全氟辛基甲基丙烯酸酯;1,1,2,2-四氢全氟辛基甲基丙烯酸酯;1H,1H,2H,2H-甲基丙烯酸-1H,1H-全氟代辛酯
  • 英文别名:1H,1H,2H,2H-Perfluorooctyl methacrylate;
    Methacrylic Acid 3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluoro-n-octyl Ester;
    Methacrylic Acid 1H,1H,2H,2H-Tridecafluoro-n-octyl Ester;
    3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-methylprop-2-enoate;
    1H,1H,2H,2H-perfluorooctyl methacrylate;
    1H,1H,2H,2H-Tridecafluoro-n-octyl Methacrylate;
    2-(Perfluorohexyl)ethyl methacrylate;
    3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluoro-n-octyl Methacrylate;
    3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluorooctyl methacrylate 
  • CAS No.:2144-53-8
  • 分子式:C12H9F13O2
  • 分子量:432.18
  • 精确分子量:432.03900
  • PSA:26.30000
  • MDL:MFCD00077580
  • InChI:InChI=1/C12H9F13O2/c1-5(2)6(26)27-4-3-7(13,14)8(15,16)9(17,18)10(19,20)11(21,22)12(23,24)25/h1,3-4H2,2H3
  • 分子结构式:

物化性质

密度:
1.496 g/mL at 25 °C(lit.)
沸点:
92 °C8 mm Hg(lit.)
闪点:
>230 °F
折射率:
n20/D 1.346(lit.)
蒸汽压:
0.116mmHg at 25°C
存储条件/存储方法:

低温保存

其它信息:

1. 性状:未确定

2. 密度(g/mL,25ºC):1.496

3. 相对蒸汽密度(g/mL,空气=1):未确定

4. 熔点(ºC):未确定

5. 沸点(ºC,常压):未确定

6. 沸点(ºC, 8mmHg):92

7. 折射率(nD20):1.346

8. 闪点(ºF):>230

9. 比旋光度(º):未确定

10. 自燃点或引燃温度(ºC):未确定

11. 蒸气压(kPa,100ºC):未确定

12. 饱和蒸气压(kPa,20ºC):未确定

13. 燃烧热(KJ/mol):未确定

14. 临界温度(ºC):未确定

15. 临界压力(KPa):未确定

16. 油水(辛醇/水)分配系数的对数值:未确定

17. 爆炸上限(%,V/V):未确定

18. 爆炸下限(%,V/V):未确定

19. 溶解性:未确定

安全信息

密度:
1.496 g/mL at 25 °C(lit.)
沸点:
92 °C8 mm Hg(lit.)
闪点:
>230 °F
折射率:
n20/D 1.346(lit.)
蒸汽压:
0.116mmHg at 25°C
存储条件/存储方法:

低温保存

其它信息:

1. 性状:未确定

2. 密度(g/mL,25ºC):1.496

3. 相对蒸汽密度(g/mL,空气=1):未确定

4. 熔点(ºC):未确定

5. 沸点(ºC,常压):未确定

6. 沸点(ºC, 8mmHg):92

7. 折射率(nD20):1.346

8. 闪点(ºF):>230

9. 比旋光度(º):未确定

10. 自燃点或引燃温度(ºC):未确定

11. 蒸气压(kPa,100ºC):未确定

12. 饱和蒸气压(kPa,20ºC):未确定

13. 燃烧热(KJ/mol):未确定

14. 临界温度(ºC):未确定

15. 临界压力(KPa):未确定

16. 油水(辛醇/水)分配系数的对数值:未确定

17. 爆炸上限(%,V/V):未确定

18. 爆炸下限(%,V/V):未确定

19. 溶解性:未确定

MSDS

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name: 3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluorooctyl
methacrylate
REACH No.: A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No.: 2144-53-8
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances


SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Skin irritation (Category 2), H315
Eye irritation (Category 2), H319
Specific target organ toxicity - single exposure (Category 3), H335
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xi IrritantR36/37/38
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal wordWarning
Hazard statement(s)
H315Causes skin irritation.
H319Causes serious eye irritation.
H335May cause respiratory irritation.
Precautionary statement(s)
P261Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
P305 + P351 + P338IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazardnone
Statements
Safety data sheet available on request.
Other hazards - none
SECTION 3: Composition/information on ingredients
Substances
Formula: C12H9F13O2
Molecular Weight: 432,18 g/mol
CAS-No.: 2144-53-8
EC-No.: 218-407-9
Hazardous ingredients according to Regulation (EC) No 1272/2008
ComponentClassificationConcentration
3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluorooctyl methacrylate
CAS-No.2144-53-8Skin Irrit. 2; Eye Irrit. 2; STOT<= 100 %
EC-No.218-407-9SE 3; H315, H319, H335
Hazardous ingredients according to Directive 1999/45/EC
ComponentClassificationConcentration
3,3,4,4,5,5,6,6,7,7,8,8,8-Tridecafluorooctyl methacrylate
CAS-No.2144-53-8Xi, R36/37/38<= 100 %
EC-No.218-407-9
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16
SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available
SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, Hydrogen fluoride
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available
SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation.
Evacuate personnel to safe areas.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.
SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Normal measures for preventive fire protection.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Recommended storage temperature: 2 - 8 °C
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.
SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) AppearanceForm: liquid
Colour: colourless
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingno data available
point
f) Initial boiling point and 92 °C at 11 hPa - lit.
boiling range
g) Flash point113 °C - closed cup
h) Evapouration rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative density1,496 g/cm3 at 25 °C
n) Water solubilityno data available
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available
SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5
SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
Inhalation - May cause respiratory irritation.
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available
SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material.
Contaminated packaging
Dispose of as unused product.
SECTION 14: Transport information
UN number
ADR/RID: -IMDG: -IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA:Not dangerous goods
Transport hazard class(es)
ADR/RID: -IMDG: -IATA: -
Packaging group
ADR/RID: -IMDG: -IATA: -
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available
SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
For this product a chemical safety assessment was not carried out
SECTION 16: Other information
Full text of H-Statements referred to under sections 2 and 3.
Eye Irrit.Eye irritation
H315Causes skin irritation.
H319Causes serious eye irritation.
H335May cause respiratory irritation.
Skin Irrit.Skin irritation
STOT SESpecific target organ toxicity - single exposure
Full text of R-phrases referred to under sections 2 and 3
XiIrritant
R36/37/38Irritating to eyes, respiratory system and skin.
Further information
Copyright 2014 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

海关数据

中国海关编码:2916140000

概述:
2916140000. 甲基丙烯酸酯. 增值税率:17.0%. 退税率:13.0%. 监管条件:无. 最惠国关税:6.5%. 普通关税:80.0%
申报要素:
品名, 成分含量, 用途, 丙烯酸、丙烯酸盐或酯应报明包装
摘要/Summary:
2916140000. other esters of methacrylic acid. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:80.0%

分子结构与计算化学数据

分子结构数据

1、 摩尔折射率:60.90

2、 摩尔体积(m3/mol):296.1

3、 等张比容(90.2K):613.6

4、 表面张力(dyne/cm):18.4

5、 极化率(10-24cm3):24.14

计算化学数据

1.疏水参数计算参考值(XlogP):5.9

2.氢键供体数量:0

3.氢键受体数量:15

4.可旋转化学键数量:9

5.互变异构体数量:无

6.拓扑分子极性表面积26.3

7.重原子数量:27

8.表面电荷:0

9.复杂度:576

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:1

热门化工词典词汇