4-Isoxazolesulfonylchloride, 3,5-dimethyl-
- 中文别名:3,5-二甲基异噁唑-4-磺酰(基)氯
- 中文释义:3,5-二甲基异唑-4-磺酰氯;3,5-二甲基异噁唑-4-磺酰(基)氯
- 英文别名:3,5-Dimethylisoxazole-4-sulfonylchloride;
3,5-dimethyl-1,2-oxazole-4-sulfonyl chloride
- CAS No.:80466-79-1
- 分子式:C5H6ClNO3S
- 分子量:195.63
- 精确分子量:194.97600
- PSA:68.55000
- MDL:MFCD00052554
- InChI:InChI=1/C5H6ClNO3S/c1-3-5(11(6,8)9)4(2)10-7-3/h1-2H3
- 分子结构式:
物化性质
- 密度:
- 1.452g/cm3
- 熔点:
- 39-40°C
- 沸点:
- 310.8ºC at 760 mmHg
- 闪点:
- 141.7ºC
- 折射率:
- 1.504
安全信息
- 密度:
- 1.452g/cm3
- 熔点:
- 39-40°C
- 沸点:
- 310.8ºC at 760 mmHg
- 闪点:
- 141.7ºC
- 折射率:
- 1.504
MSDS
Name: | 3 5-Dimethylisoxazole-4-sulfonyl chloride 97% Material Safety Data Sheet |
Synonym: | |
CAS: | 80466-79-1 |
Section 1 - Chemical Product MSDS Name:3 5-Dimethylisoxazole-4-sulfonyl chloride 97% Material Safety Data Sheet
Synonym:
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# | Chemical Name | content | EINECS# |
80466-79-1 | 3,5-Dimethylisoxazole-4-sulfonyl chlor | 97% | unlisted |
Hazard Symbols: C
Risk Phrases: 34
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Not available.
Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container.
Section 7 - HANDLING and STORAGE
Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 80466-79-1: Personal Protective Equipment Eyes: Not available.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 40 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C5H6ClNO3S
Molecular Weight: 196
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, bases.
Hazardous Decomposition Products:
Hydrogen chloride, chlorine, nitrogen oxides, carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 80466-79-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3,5-Dimethylisoxazole-4-sulfonyl chloride - Not listed by ACGIH, IARC, or NTP.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: III
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 80466-79-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 80466-79-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 80466-79-1 is not listed on the TSCA inventory.
It is for research and development use only.
SECTION 16 - ADDITIONAL INFORMATION
N/A
海关数据
中国海关编码:2934999090
- 概述:
- 2934999090. 其他杂环化合物. 增值税率:17.0%. 退税率:13.0%. 监管条件:无. 最惠国关税:6.5%. 普通关税:20.0%
- 申报要素:
- 品名, 成分含量, 用途
- 摘要/Summary:
- 2934999090. other heterocyclic compounds. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:20.0%
分子结构与计算化学数据
计算化学数据
1.疏水参数计算参考值(XlogP):1.2
2.氢键供体数量:0
3.氢键受体数量:4
4.可旋转化学键数量:1
5.互变异构体数量:无
6.拓扑分子极性表面积68.6
7.重原子数量:11
8.表面电荷:0
9.复杂度:235
10.同位素原子数量:0
11.确定原子立构中心数量:0
12.不确定原子立构中心数量:0
13.确定化学键立构中心数量:0
14.不确定化学键立构中心数量:0
15.共价键单元数量:1